Alloys Copper Manual electrode ECuNi Alxanka qalabyada
Codsiga
Inta badan waxaa loo isticmaalaa alxanka 70-30 copper-nickel alloy ama 70-30 copper-nickel alloy / 645-Ⅲ birta isku dhafan ee birta iyo 70-30 naxaas-nickel alloy sida cladding, oo caadi ahaan loo isticmaalo dhismayaasha injineernimada badda, sida qalabka nadiifinta, biyaha badda. habka daawaynta, uumi-bixiye, qaboojiyaha, iwm.
Sidoo kale loo isticmaalo birta 645-Ⅲ sida qaab dhismeedka dahaarka aasaasiga ah ee birta isku dhafan; Waxa kale oo loo isticmaali karaa 90/10 copper-nickel alloys.
QALABKA Kiimikada:
| ALLOY(wt%) | C | Mn | Si | Ni | Fe | Ti | Cu | P | S | |
| XEERARKA GB/T | - | 2.50 | 0.50 | 29.0-33.0 | 2.50 | 0.50 | Margin | 0.02 | 0.015 | |
| XEERARKA AWS | - | 1.0-2.5 | 0.50 | 29.0-33.0 | 0.40-0.75 | 0.50 | Margin | 0.02 | 0.015 | |
| TUSAALE QIIMAHA | 0.01 | 1.45 | 0.3 | 30.4 | 0.65 | 0.1 | 67 | 0.090 | 0.004 | |
HANTIDA makaanikada:
| HANTIDA | XOOG BADAN (MPa) | XOOGGA KORDHINTA (MPa) | QIIMAHA IIMAPACT J/℃ | ELONGATION(%) | ||||
| XEERARKA GB/T | - | 350 | - | 20 | ||||
| XEERARKA AWS | - | 350 | - | 20 | ||||
| TUSAALE QIIMAHA | 316 | 435 | - | 36.5 | ||||
XILDHIBAANADA ALXANKA LAGU SOO TALIYEY:
| QAYBAHA DHUL-DHAQAALAHA (mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||||
| Koronto (Amp) | H/W | 80-120 | 100-150 | 140-180 | |||||||
| O/W | 70-110 | 90-135 | - | ||||||||
Gaar ahaan
Electrode-ku waa Cu70-Ni30 alloy sida xudunta alxanka, dahaarka taxanaha hydrogen hoose ee korantada-nickel-ka.
Waxyaalaha hoose ee haraaga ah (S, P, Pb, Sn iyo Zn, iwm.), iska caabin dildilaaca wanaagsan
Waxa ku jira Mn iyo Ti si habboon ayaa loo kordhiyaa, dildilaaca kulaylka iyo daloolada ayaa xaddidan.
Muuji faahfaahin
Iska caabin dildilaaca wanaagsan
Xakamaynta xaddidan ee dildilaaca kulaylka iyo daloolada
Anaga ku saabsan
Bandhig fioor warshadeed
Kiiska codsiga
Lacag bixinta soo socota ee saamiyada Inner Mongolia Xinao Energy Co., Ltd. 3*3000m³ haan heerkul hoose ah
Shandong Zibo Haiyi 8 waxay dejisaa 3000m³ haan wareegsan oo propylene ah
Toogashada dhabta ah ee warshadda
QALABKA Kiimikada:
| ALLOY(wt%) | C | Mn | Si | Ni | Fe | Ti | Cu | P | S | |
| XEERARKA GB/T | - | 2.50 | 0.50 | 29.0-33.0 | 2.50 | 0.50 | Margin | 0.02 | 0.015 | |
| XEERARKA AWS | - | 1.0-2.5 | 0.50 | 29.0-33.0 | 0.40-0.75 | 0.50 | Margin | 0.02 | 0.015 | |
| TUSAALE QIIMAHA | 0.01 | 1.45 | 0.3 | 30.4 | 0.65 | 0.1 | 67 | 0.090 | 0.004 | |
HANTIDA makaanikada:
| HANTIDA | XOOG BADAN (MPa) | XOOGGA KORDHINTA (MPa) | QIIMAHA IIMAPACT J/℃ | ELONGATION(%) | ||||
| XEERARKA GB/T | - | 350 | - | 20 | ||||
| XEERARKA AWS | - | 350 | - | 20 | ||||
| TUSAALE QIIMAHA | 316 | 435 | - | 36.5 | ||||
XILDHIBAANADA ALXANKA LAGU SOO TALIYEY:
| QAYBAHA DHUL-DHAQAALAHA (mm) | 2.6*300 | 3.2*350 | 4.0*350 | ||||||||
| Koronto (Amp) | H/W | 80-120 | 100-150 | 140-180 | |||||||
| O/W | 70-110 | 90-135 | - | ||||||||
